Mijn winkelwagen  

Monthly Archives: January 2017

  1. Sleeves voor roofvis onderlijnen

    Nuttige info omtrent sleeves voor roofvis onderlijnen (leaders)
  2. DIY Package Spinnerbait Grinder 42gr

    Parts:
    -1x Spinnerbait Head (42gr.) 
    -2x RR Skirt (Black/ Black/Yellow
    -1x BB Swivel with Splitrings #3

  3. Zelf shads gieten (Deel 4)

    We hebben even een weekje overgeslagen, omdat ik het druk had met de Visma, die ook voor Totalfishing een groot succes was. Vele mooie lezingen over onze hobby kwamen er in onze stand voorbij en liet het publiek zien dat vooral voor veel praktijkervaring je bij Totalfishing moet zijn.

  4. Manual How to Use Envirotex

    In this article I will elaborate on the best way to use of Envirotex Lite and what to do in case you encounter some problems along the way.

  5. Manual DIY Package Sybe TD

    Start with sanding this jerkbait lightly, so that dust and airbubbles disappear. Spray the bait in the desired colors, attach the eyes on the lure. Screw the screw eyes into the predrilled holes. Attach the other hardware and your ready! Lure has been pre-leaded.

  6. Manual DIY Spinnerbait Tandem 14gr

    Parts:
    -1x Spinnerbait Head (14gr.) 
    -1x RR Skirt
    -1x BB Swivel with Splitrings #3

  7. Manual DIY Chatterbait Skirted

    Parts:
    -1x Chatterbait Head 14, 21 of 28gr.
    -1x Chatter Blade Small (or Large)
    -1x Skirt 20cm 

  8. Manual DIY Leaders /Onderlijnen maken

    We make all our leaders as shown in this manual. 

  9. DIY Package Spin Glide

    First drill the 6mm hole for the lead and drill three 1mm holes for the screw eyes.

  10. DIY Package Happy Tail

    Start by sanding this Mahogany wooden plug lightly, so that the particles and the bubbles disappear. Spray or paint the plug in the desired color (s).Glue the Lure lip into the corresponding slot. Stick the adhesive eyes on the plug. Then attach the screw eyes into the predrilled holes, possibly with a drop of glue. After that attach the Splitrings and hooks.

Pagina